UV DTF 3D Permanent Stickers - Upload Your Own Gang Sheet
Create vibrant and durable designs with our UV DTF Gang Sheet Builder. Our 3D permanent stickers are extremely durable, dishwasher-proof and scratch resistant - ensuring long-lasting results. Great for indoor and outdoor use! Easily customize designs with our builder and enjoy vibrant colors. Seamlessly fit multiple designs while building your own gang sheet for efficient production. Perfect for bulk projects or experimenting with various designs.
Note:
Permanent Stickers are extremely durable, color-fast, chip & weather-resistant stickers/decals, but they can still wear down or lose adhesion depending on the conditions & circumstances. For that reason, we can’t make any warranties or guarantees and should not be used for mission-critical applications or equipment
Create vibrant and durable designs with our UV DTF Gang Sheet Builder. Our 3D permanent stickers are extremely durable, dishwasher-proof and scratch resistant - ensuring long-lasting results. Great for indoor and outdoor use! Easily customize designs with our builder and enjoy vibrant colors. Seamlessly fit multiple designs while building your own gang sheet for efficient production. Perfect for bulk projects or experimenting with various designs.
Note:
Permanent Stickers are extremely durable, color-fast, chip & weather-resistant stickers/decals, but they can still wear down or lose adhesion depending on the conditions & circumstances. For that reason, we can’t make any warranties or guarantees and should not be used for mission-critical applications or equipment
- Original image should be minimum 300 dpi and in PNG, SVG or JPEG format.
- Note: enlarging a 300dpi image (i.e. from 3" to 9") and exporting it may cause pixelation and quality issues.
- Color shifts can occur when converting to CMYK for UV DTF printing.
- Do not mirror your image.
- We recommend a minimum of 2pt or 4px for small fonts or thin lines to ensure the ink is applied properly.
- Avoid neon glow, gradients, and soft edges. DTF printers can have issues printing these designs accurately.
- We print what we receive. Spelling, placement, sizing, and image quality will not be fixed by our team.
1. Prep Your Surface and Pre-Squeegee Your UV-DTF sticker
Prepping the Area - When necessary, clean the surface of your item before applying the sticker using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.
Pre-Squeegee - After cutting your sticker/decal out, place the design face down with the white side facing up. Using the padded end of the included squeegee, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.
2. Separating The Clear Carrier Sheet From The White Backing
To detach the clear carrier sheet from the white backing, make a small tear away from the design. Gently peel the clear carrier sheet, watching to ensure the whole design lifts off the white backing. Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee, and attempt to peel again from a different angle. You’ll get a feel for it with experience.
3. Placing Your UV-DTF Sticker Onto Your Item
First, identify the placement area on your item.
For smaller designs (4 inches & under), carefully place the design onto the placement area with two hands controlling the placement.
For larger designs (6 inches & larger), you may find it easier to place the sticker starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping.Tip: Leave a corner of the carrier sheet unpressed to the product for easy peeling.
4. Completing the Transfer Process
After placing the design, firmly squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. Use your EYES and not just your hands. If any part of the design is not adhering, lay the carrier sheet back down, re-squeegee and try peeling from a different angle.